K190
Temperature Controller Standard
Standard version software
(K190ETCstd, K190+ETCstd) included with
K190 kit
(freeware)
(suitable for use on Win10 tablets)
Software works with the standard K190, and
the enhanced K190E firmware chip from Ozitronics.
Relay status is now logged at the
same time as temperature (rather than as an
"event").
There are 2 versions...
1. "K190+ETCstd"
provides software control and monitoring of both firmwares
2. "K190ETCstd"
provides hardware configuration and software monitoring for the E
firmware
Layouts are similar to the original version. Both are freeware.
Why
not an all-in-one version?... I couldn't see a way to do
this cleanly. If I'm not clear, that lack of clarity will
cause confusion for users.
System
Requirements:
- WinXP to Win10 (not for WinRT or Win8 Tablets)
- 4.9 MB of hard drive space (incl. pdf Help file)
- an available serial port
** Log files are saved to the program folder.
Do not use "Program
Files" folder for installation
Download here
Change Log
K190+ETCstd
Sep 27/16 v2.1.2.1 (XE4-T04)
- bugfix in the handling of the decimal separator
- added Log font size adjust
- added Clock display
- minor visual adjustments
- Win2K support dropped
- Help file not updated
Nov 19/15 v2.1.1.1 (XE2-T03)
- visual changes/adjustments to enhance operation
on a small (eg: 7") Win10 tablet.
Notes:
- tablet should be set to Desktop mode (Tablet mode = OFF).
- assumes tablet in Landscape, with Taskbar at bottom
- no changes to functionality.
- Help file not updated.
Feb 03/13 v2.0.1.1 (08)
- now recognizes and works with the K190E firmware
version. (software control only)
- now use sliders for configuring Setpoint and Dropout values.
Choosing either DegF or DegC for display will
change the number range for the SP slider, to
coincide with the equivalent temperature working
range for the sensor.
- manual relay-control buttons have been moved to
the sidebar on the right. Clicking a button now
automatically disables Thermostat control for
that channel (if enabled).
- revised logging...
- now choice of 30s or 1min for Log Period.
- relay states are now recorded at same time as
temperatures rather than as "events".
In the Log, relay states are shown thus...
- "O" = relay ON
- "x" = relay OFF
Relay states appear in their own columns,
next to their associated temperature values.
- Temperature display header... Relay status display
has been modified to be consistent with how it's
shown in the Log.
- program window can be extended vertically, which
allows more Log detail to be shown.
- information about Keyboard actions is now available
as a popup hint -- mouse-hover over the keyboard
symbol near the Help button.
- Help file has been updated.
K190ETCstd
Sep 27/16 v.1.2.1 (XE4-T07)
- modified software to work with new v2.1.1 firmware
- bugfix for Decimal Separator issue
- added clock display
- added Log font size adjust
- other minor visual adjustments
- Win2K support dropped
- Help file updated
Nov 19/15 v1.1.1 (XE2-T04)
- visual changes/adjustments to enhance operation
on a small (eg: 7") Win10 tablet.
Notes:
- tablet should be set to Desktop mode (Tablet mode = OFF).
- assumes tablet in Landscape, with Taskbar at bottom
- no changes to functionality.
- Help file not updated.
Aug/12 v1.0.1.1 (2)
- first release for 190E hardware config/control.
top |